Embry‑Riddle partners with private and public entities to assist in developing solutions to today's and tomorrow's aeronautical and aerospace problems. Here at the world's largest aviation-oriented university, our focus on applied research is unique.
Filter by



41-50 of 210 results

  • Developing Autonomous, Targeted Feedback in Precalculus

    PI Darryl Chamberlain

    The overriding goal of this project is to investigate student knowledge in a Precalculus course at ERAU-W in order to construct autonomous, targeted feedback for free-responses questions to enhance students' online learning. This will be accomplished by analyzing student responses to exam questions and interviewing students to probe how their mathematical conceptions correspond to their exam responses. 

    Categories: Faculty-Staff

  • A Boltzmann Simulator for Porous Media Flows

    PI Leitao Chen

    ​This project develops numerical simulations through parallel development of a Boltzmann model to capture and elucidate multiscale thermos-fluids behaviors in porous media, as well as the fluid-solid interactions.

    ​To accurately simulate porous media flow problem, a kinetic model based on the Boltzmann equation (BE) was developed. Two primary reasons justified the choice of a BE-based approach over conventional Navier-Stokes (N-S) computational fluid dynamics (CFD) methods. First, the fluid flow within porous media often occurs in extremely narrow channels, representing high-Knudsen-number flow regimes. The Knudsen number (Kn), defined as the ratio of molecular mean free path to the smallest channel dimension, indicates that traditional N-S equations are physically inadequate for accurately describing these flow conditions. Conversely, BE-based models are well-established to yield physically accurate results for high-Kn flows. Second, from a computational standpoint, the BE inherently involves a simpler mathematical structure due to its linear advection term, substantially reducing computational overhead compared to the nonlinear N-S equations. This simplification significantly improves computational efficiency, especially critical for simulating flow within complex porous structures. To better capture the complex boundaries in porous media, a meshless discretization method of the BE has been developed in this project. This meshless approach entirely eliminates dependency on mesh generation, offering significant advantages in accurately simulating flow through porous media.

    Categories: Faculty-Staff

  • Project Global Officer

    PI Aaron Clevenger

    Project GO provide's overseas language instruction consisting of a minimum of 8 weeks and/or 150 contact hours (per grant program) to ROTC students nationwide with the goal of helping student to reach an ILR 1 proficiency level in a critical language: Mandarin Chinese in Taiwan, and Arabic in Jordan. All students should reach the objective of successfully applying the target language and cultural knowledge in actual communication with native speakers.

    Categories: Faculty-Staff

  • Pure Water Project (PWP)

    PI Marc Compere

    Pure Water Project aims to improve the health and sustainability of individual communities in the Dominican Republic by installing a solar-powered water purification system. Embry‑Riddle students design, build, test and deliver a solar water purifier to carefully selected communities in the Dominican Republic and launch water selling businesses to benefit the local community’s health and economy.



    Many in the Dominican Republic either pay for clean water or live with chronic intestinal sickness from contaminated water. Our solar water purifier is designed to provide clean drinking water for 500 adults per day. It generates 1000 gallons of clean water daily, which is enough to bottle and sell to the surrounding community.

    This project is an ideal intersection of humanitarian aid and engineering. Our students design and build Embry‑Riddle's solar-powered water purifier for delivery to a carefully selected community each year. Students learn how solar power systems work with batteries, pumps and filters to construct a purifier that runs entirely from the sun. This project provides our students a global perspective and makes them better engineers through their efforts to achieve goals despite the dynamic, fluid environment in a different culture.

    Categories: Faculty-Staff

  • Virtual Communities of Practice: Scaling, Belonging, and Effective Feedback

    PI Cristina Cottom

    CO-I Angela Atwell

    CO-I Lisa Martino

    CO-I Sara Ombres

    The purpose of this research study is to extend CTLE-W's previous research on virtual faculty learning communities (VCoP) by testing a new VCoP for scalability with an expanded participation pool. This study also seeks to increase the sense of belonging among non-collocated faculty participants and to use the VCoP to provide continuing education on effective feedback practices.This VCoP and the research study will last for 8 weeks during the fall and spring. As part of the participation in the VCoP faculty will complete several online asynchronous activities using VoiceThread to discuss effective feedback practices, as well as a survey at the beginning and end of their VCoP experience. 



    This research study is an extension and expansion of the Center for Teaching and Learning Excellence’s existing VCoP. In 2016, our research team was awarded a grant from the Professional and Organizational Development (POD) Network to create a VCoP tailored specifically to online adjunct faculty, which yielded positive findings. In this current study, we were awarded additional grant funds from POD to build upon this success by designing a VCoP that recruits from our entire faculty pool in order to measure how it affects their sense of belonging and to test the framework we created for scalability. In addition, this collaborative experience will not focus on teaching in a single modality, but will instead address a shared practice that is relevant to all instructors. Regardless of modality, all instructors can improve effective feedback practices. Therefore, in this extended and expanded VCoP all faculty will have an opportunity to explore practices around effective feedback. This research will contribute to the existing literature by studying the scalability of VCoPs in faculty development settings and test how participation in VCoPs promotes belonging among dispersed faculty members teaching in multiple modalities. In addition, this study will also result in the production of documents that will facilitate future VCoP development and will generate valuable co-created knowledge on effective feedback. This study will employ a mixed-methods design that will use both quantitative and qualitative data to analyze the results of the survey. In addition, data will be collected from VoiceThread, facilitator reflections, observation notes, and artifact analysis. 

    Categories: Faculty-Staff

  • Multi-Modal Sensor Fusion for ASV Situational Awareness

    PI Eric Coyle

    CO-I Patrick Currier

    An investigation into strategies and techniques for maritime object detection and classification using visual and spatial data with an emphasis on sensor fusion.

    This project focuses on enhancing autonomous surface vessel (ASV) situational awareness through the fusion of visual and spatial sensing, aiming to improve the detection and classification of objects in the surrounding environment. Such technologies have applications in patrolling test ranges, enhancing harbor security, and using ASVs as support vessels for manned operations. The research is structured around four main objectives: creating and annotating multi-modal maritime data for sensor fusion, developing accurate surface maps for navigation, applying machine learning techniques for robust object identification, and creating sensor fusion strategies for improved robustness. The team uses a custom data acquisition system, which was used to create the open-source ER-Coast dataset. This dataset includes Light Detection and Ranging (LiDAR), high-resolution cameras, infrared cameras, and localization sensors to capture coastal waterways in Florida, both day and night, across 36 sequences. A portion of this data has been made publicly available for future LiDAR semantic segmentation, image segmentation, and object detection studies.

    Categories: Faculty-Staff

  • Exploring vulnerabilities, threats, and exploits in small unmanned aerial systems (sUAS)

    PI John Craiger

    Small unmanned aerial systems (sUAS), also known as drones, have been called flying computers given the overlap in their technologies. The purpose of this research is to conduct cybersecurity vulnerability assessments of several sUAS to identify vulnerabilities, threats, and associated exploits to the sUAS. Cyber vulnerabilities could theoretically allow a bad actor to take control of the sUAS, cause it to malfunction while in flight, and more. 



    The Federal Aviation Administration (FAA) predicts that purchases of hobbyist small unmanned aerial systems (sUAS) will grow from 1.9 million in 2016 to 4.3 million by 2020, and commercial sUAS to increase from 600,000 in 2016 to 2.7 million by 2020. sUAS, often referred to as ‘drones,’ are comprised of aeronautical hardware, a CPU, RAM, onboard storage, radio frequency communications, sensors, a camera, and a controller used by the pilot-in-command.  Some have argued that a sUAS is essentially a flying computer.  As such, sUAS may be susceptible to many of the types of attacks that are often used on personal computers attached to a computer network.  Potential attacks on sUAS include de-authentication (i.e., ‘terminating’ the sUAS from the network); GPS spoofing (e.g., modifying or faking GPS coordinates); unauthorized access to the computer flight systems and onboard storage; jamming the communications channel (resulting in the possible loss of the sUAS); and contaminating the sUAS geofencing mechanism (allowing the sUAS to fly in a ‘no-fly-zone’). The result of these types of attacks include theft of the sUAS; flying the sUAS into sensitive/off- limits areas; purposefully crashing the sUAS to cause damage to persons or equipment (including airplanes, crowds, etc.); and theft or adulteration of sensitive data (e.g., law enforcement surveillance data).

    The purpose of this research is to identify potential threats, vulnerabilities, and exploits for a subset of consumer/hobby sUAS that were included in the 2016 ERAU sUAS Consumer Guide. The research will apply a threat modeling approach to identify cyber-based vulnerabilities; potential attack vectors; commercial-off-the-shelf and “home-built” equipment required to effectuate attacks; cyber and kinetic ramifications of attacks; and mitigating strategies for protecting sUAS from cyber-attacks.  Vulnerability assessments are to be conducted via network scanning tools to identify open network ports, vulnerability scanners that identify system vulnerabilities, and tools used for the associated exploitation of these vulnerabilities.  The exploitation (i.e., attack) architecture will use an attack proxy consisting of a Raspberry PI running Kali Linux OS, and specifically outfitted with multiple network interface cards, allowing the proxy to capture and manipulate network traffic in either managed or monitor (i.e., active vs. passive) mode.  Given that most personal computers are known to suffer from various cyber vulnerabilities, and many of the components and software are the same as used in personal computers, we expect to observe the same for the sUAS. 

    Identifying threats and vulnerabilities has two purposes, one defensive, and one offensive.  From the defensive side, manufacturers, and even users, should be aware of potential threats.  Manufacturers should be aware that the design and component decisions can effect the cybersecurity of the sUAS.  From the offensive side, sUAS pilots are known to fly them for nefarious purposes, including flying into no-fly zones, violating the privacy of individuals using attached high-definition cameras, etc.  Indeed, a new and growing industry involves developing anti-drone techniques to protect against rogue sUAS and their pilots.  

    Categories: Faculty-Staff

  • Using Virtual Reality to Identify Cybersecurity Threats for Navy Midshipmen

    PI Andrew Dattel

    CO-I Omar Ochoa

    CO-I Daniel Friedenzohn

    CO-I Trevor Goodwin

    CO-I Harry Brodeen

    This research is investigating the training of U.S. Navy Midshipman enrolled in the Reserve Officer Training Corps (ROTC) at Embry‑Riddle Aeronautical University (ERAU) to identify cyber and security threats in a simulated bridge of a Navy vessel. Midshipmen will receive classroom instruction, as well as training in a virtual reality bridge simulator. The knowledge and skills training the midshipmen received is intended to transfer to the applications of midshipmen’s future positions and careers.



    Cyber and security threats are burgeoning tactics being used in wartime affairs. The first line of defense of a vulnerable vessel is for the crew to distinguish misinformation from factual information. To increase the preparedness of cybersecurity threat awareness, the Office of Naval Research is interested in innovative training initiatives at colleges and universities that support Reserve Officer Training Corps (ROTC) programs. Twenty Embry‑Riddle Aeronautical University (ERAU) enrolled in Navy ROTC will be recruited to participate in an 8-week long training program. These 20 midshipmen will participate in traditional classroom instruction, practice on a bridge (i.e., ship control room) virtual reality (VR) simulator, and participate in a specifically designed VR bridge application. This VR application is being designed by the XR Lab in the College of Aviation.

    In the classroom setting, midshipmen will receive instruction in theoretical and practical applications to identify cyber and electronic warfare threats. This instruction will go beyond any cybersecurity training that may have been received in previous courses offered by the Naval Sciences curriculum. Group discussion and activities to encourage inquiry-based learning will fulfill some of the classroom requirements and when participating in the VR bridge application.

    Midshipmen will also receive a few hours of practice in the Conning Officer Virtual Environment (COVE) simulator. The Cove simulator is designed to allow students to practice navigating ship maneuvering without the risk and expense of operations at sea. However, the COVE simulator does not permit the injection of misinformation experienced in a cyber-intrusion situation.

    A VR application will replicate the bridge of a Navy vessel and immerse the operators in a VR environment. This application will permit subtle cyber threats to be introduced during the scenario. The first phase of the application will include three primary resources of the bridge: the Automatic Identification System (AIS), the Voyage Management System (VMS), and Radar. The AIS is based on a transponder system and functions as a broadcast messaging system. The VMS functions as the navigation charting display and is partially based on the Global Positioning System (GPS). Threats such as misinformed broadcast information, erroneous navigation position (e.g., showing own vessel traveling in an untrue heading), and radar misinformation (e.g., showing a friendly ship as an enemy ship) are potentially vulnerable by hacking and other nefarious actions.

    Midshipmen in the Trainee position will spend several hours in the VR simulator identifying these cyber threats. Midshipmen will also spend time in the Instructor position to execute command functions that introduce the misinformation. This role of Instructor will show the midshipmen when a threat is introduced and how the Trainee responds. There will be three to four midshipmen observers during any given scenario. After each scenario, the Trainee, Instructor, and Observers will discuss hits and misses that occurred during the scenario. In addition to cohort discussion periods, performance feedback will be given by the instructors.

    Research Design

    This research will utilize a 2 x 2 mixed quantitative design. Twenty midshipmen (the experimental group) will complete a pretest before starting the curriculum and a posttest after completing all aspects of the curriculum (traditional classroom instruction, participation in the COVE simulator, and participation in the specifically designed VR simulation). A control group that will receive the pretest and posttest will be compared to the experimental group. Evaluation metrics will include accuracy and response time to threats in the VR simulations and measurements of the skills developed in the COVE simulator and knowledge acquired in classroom instruction and the specifically designed VR simulation. At the end of the study, participants will complete a survey consisting of forced-choice and open-ended questions about their experience, self-efficacy, and opinions about the 8-week long study.

    This study intends to train midshipmen to be better prepared to identify cybersecurity threats in their future positions and career following graduation from the program. The specific VR application is being designed to be sustainable to be further utilized for the future Naval curriculum and other applications.

    Categories: Faculty-Staff

  • Natural Fiber Reinforced Polymer (NFRP) Composites

    PI Birce Dikici

    This research is directed toward understanding the thermophysical and nanomechanical properties of NFRP composites in order to predict and optimize the behavior of the final product.



    ​According to Mordor Intelligence Market Research report, the natural fiber reinforced composites market is projected to register a compound annual ground rate of 11% during the forecast period (2021-2026). Natural fibers have the advantages of low cost, low density, and biodegradability. However, natural fibers also have some limitations such as moisture absorption, poor chemical and fire resistance, variations in fiber geometry, high dispersion of mechanical properties, poor interfacial interactions with polymeric matrices. Cellulose fibers are the most abundant natural fiber worldwide that form most of the agricultural wastes. One intriguing form of these fibers is nanocellulose. Nanocellulose consists of rod/fibril-like nanoparticles that have outstanding mechanical properties, low coefficients of thermal expansion, with a surface chemistry that can be readily modified.  Our group have demonstrated the ability to extract nanocellulose fibers from pinecones - using acid digestion- and fabricate an epoxy based composite. This research is directed toward understanding the thermophysical and nanomechanical properties of NFRP composites in order to predict and optimize the behavior of the final product.

    Categories: Faculty-Staff

  • Investigation of an Injection-Jet Self-Powered Fontan Circulation: A Novel Bridge and Destination Therapy for the Failing Fontan

    PI Eduardo Divo

    CO-I Arka Das

    This research effort unifies multiscale computational fluid dynamics (CFD) and mock circulatory loop (MCL) benchtop cross-validations to analyze the hemodynamic impact of an innovative palliative alternative: the Injection-Jet-assisted Fontan circulation.



    A structurally normal heart consists of two separate pumping chambers, or ventricles. One pumps deoxygenated blood from the body to the lungs, while the other delivers oxygenated blood from the lungs to the body. Approximately 8% of all newborns with a congenital heart defect have only a single functioning ventricle (SV). These patients cannot survive without a series of staged palliative operations to ensure adequate blood flow to both the pulmonary and systemic circulations. The final step in this staged reconstruction is the Fontan operation. While lifesaving, this unique physiology directs systemic venous return passively into the pulmonary arteries without the need for a subpulmonary pump. This results in chronically elevated central venous pressure and reduced cardiac output. Over time, this non-physiologic flow leads to significant morbidity, including hepatic fibrosis, protein-losing enteropathy, and Fontan-associated liver disease. A 2018 study of 683 adult Fontan patients from the Australian and New Zealand Fontan Registry reported 20% mortality by age 40, with only 53% free of heart failure symptoms and 41% free of serious adverse events. Similar outcomes have been documented worldwide, with nearly half of the observed morbidity and mortality attributed directly to failure of the unique Fontan circulatory system. To address this growing clinical challenge, our team is developing a novel, surgically implantable Injection-Jet Shunt (IJS) as a passive support strategy for patients with a failing Fontan circulation. This approach challenges the prevailing paradigm that mechanical pumps are the only viable support option for this population. Our proposed mechanism utilizes an intra-corporeal, surgically feasible shunt that harnesses the patient’s own cardiac power to inject a high-velocity jet from the aorta into the Fontan conduit. This jet entrains ambient inferior vena cava (IVC) flow, facilitating momentum transfer into the pulmonary circuit and unloading proximal venous pressure, all without any external power source. Multi-scale CFD simulations have demonstrated that this mechanism can lower Fontan pressure by 3 to 4 mmHg while maintaining clinically acceptable systemic oxygen saturations. These encouraging in-silico findings are currently being cross-validated in-vitro using a dynamically calibrated MCL that replicates Fontan hemodynamics under both resting and simulated exercise conditions. To characterize the flow behavior and jet entrainment dynamics of the Injection-Jet Shunt (IJS), the experimental MCL integrates both Particle Image Velocimetry (PIV) and Light-Induced Fluorometry (LIF) systems. PIV enables high-resolution quantification of velocity fields and shear layers, while LIF captures real-time oxygen transport in benchtop Fontan surrogates, allowing for the assessment of systemic flow distribution and entrained volume fractions. A Proper Orthogonal Decomposition trained Radial Basis Function (POD-RBF) interpolation framework is applied to reconstruct and enhance the spatiotemporal flow fields. This combined optical and data-driven approach enables detailed mapping of jet structure, entrainment efficacy, and pulmonary perfusion, supporting the optimization of IJS configurations for future clinical translation. If successful, the IJS may provide a low-risk, fully passive alternative to conventional mechanical support, potentially delaying or obviating the need for heart transplantation and improving quality of life for children and young adults with single-ventricle physiology.

    Categories: Faculty-Staff

41-50 of 210 results